ALGLASS FC 500 BURNER

ALGLASS FC range - Oxy-fuel burner for glass applications

The ALGLASS FC burner is a non-water-cooled oxy-fuel burner especially designed for continuous melting furnaces. This burner is particularly appropriate for most glass-type applications.The ALGLASS FC burner uses a design (Patent pending) where fuel and oxygen mix outside the burner block. Fuel and oxygen are introduced into the furnace through a unique configuration of injectors that produces a highly luminous flame up to three times wider than conventional oxy-fuel burners. The fuel is distributed, at the bottom of refractory burner block, among three natural gas injectors arranged in a fan-shaped configuration, so that the streams of fuel form a wide sheet of gas in the furnace.
Oxygen is injected at lower velocity from two injectors located at the top of the block, that direct the oxygen flow towards the jets of fuel.

General information 

Model
ALGLASS FC 500
Max. Comb. Cap 750 kW
Nom. Comb. Cap. 500 kW
Min. Comb. Cap. 250 kW

 

Spare parts

  • Burner description

Spare part designation
CNPL reference for order
Body 1472 4010 0000
Bracket 1472 4100 0000
Refractory Block (Ermold) with FO hole 1472 4200 0000
Refractory Block (ZM9-27V) with FO hole 1472 4600 0000
Refractory Block (ZM9-27V) without FO hole 1472 4800 0000
Fiber gasket 1472 4000 0005
Viton flat-ring 1472 4000 0006
NG Lance (not equipped with injectors) 1472 4000 0010
FO Trident Lance (not equipped with injector) 1472 4000 0030
NG D11,5 Set 3 injectors 1472 4000 0011
NG D11,8 Set 3 injectors 1472 4000 0012
NG D12 Set 3 injectors 1472 4000 0013
FO 14° Trident injector 1472 4000 0033
FO 16° Trident injector 1472 4000 0034
FO 12° Trident injector 1472 4000 0032

 

User Manual

Find your Safety Data Sheet