ALGLASS FC 200 BURNER

ALGLASS FC range - Oxy-fuel burner for glass applications

The ALGLASS FC burner is a non-water-cooled oxy-fuel burner especially designed for continuous melting furnaces. This burner is particularly appropriate for most glass-type applications.The ALGLASS FC burner uses a design (Patent pending) where fuel and oxygen mix outside the burner block.
Fuel and oxygen are introduced into the furnace through a unique configuration of injectors that produces a highly luminous flame up to three times wider than conventional oxy-fuel burners. The fuel is distributed, at the bottom of refractory burner block, among three natural gas injectors arranged in a fan-shaped configuration, so that the streams of fuel form a wide sheet of gas in the furnace.
Oxygen is injected at lower velocity from two injectors located at the top of the block, that direct the oxygen flow towards the jets of fuel.

General information 

Model
ALGLASS FC 200
Max. Comb. Cap 300 kW
Nom. Comb. Cap. 200 kW
Min. Comb. Cap. 50 kW

 

Spare parts

  • Burner description

Spare part designation
CNPL reference for order
Body 1472 3010 0000
Bracket 1472 3100 0000
Refractory Block (ZM9-27V) without FO hole 1472 3800 0000
Fiber gasket 1472 3000 0005
Viton flat-ring 1472 3000 0006
NG / PR Lance (not equipped with injectors) 1472 3000 0010
NG D6,7 SET 3 Injectors 1472 3000 0019
PR D4,2 SET 3 Injectors 1472 3000 0020

 

User Manual

Find your Safety Data Sheet